[HECnet] Decnet on RSX-11
Kurt Hamm
kurt at hamm.me
Sat Jun 8 17:36:37 PDT 2019
Ugh. Back to work.
I did see some errors....
Kurt
On Sat, Jun 8, 2019, 8:35 PM Johnny Billquist <bqt at softjar.se> wrote:
> Well, just taking a peek at CURLY, I can also tell that you have not
> managed to get the multinet links up and running, but are communicating
> with DECnet over ethernet. :-)
>
> Johnny
>
> On 2019-06-09 02:20, Kurt Hamm wrote:
> > That's it! Everything works great. I have the node list and can access
> > reachable nodes from the PDP-11.
> >
> > This is just really wonderful.
> >
> > As a thank you, I will leave the mailing list alone for a while. ha!
> >
> > Kurt
> >
> > On Sat, Jun 8, 2019 at 6:42 PM Johnny Billquist <bqt at softjar.se
> > <mailto:bqt at softjar.se>> wrote:
> >
> > Ok, a quick rundown on some of the more esoteric details about lines
> > and
> > circuits might be useful here.
> >
> > First of all, Kurt, you might want to redo the NETGEN and not set the
> > system up for DECnet routing. It takes a lot of resources, and if you
> > don't really want it, you are much better off with a system not even
> > generated for it.
> >
> > The question about remote nodes are just for an initial population of
> > your local nodename database. All you need there is really to define
> > MIM
> > (1.13). You can then copy the whole nodename database from MIM over
> to
> > your machine that way instead. Let me know if you want some details
> on
> > that step.
> >
> >
> > On 2019-06-08 22:25, Mark Matlock wrote:
> > > Kurt,
> > > If you want two circuits like UNA-0 and IP-0-0 I think you
> > have to
> > > be a routing node (but not an area router).
> >
> > Not really, but maybe. If you define multiple circuits, and are an
> > end-node, only one circuit will be active. But others can exist, and
> > the
> > system will fall back to some other circuit if the active one goes
> > down.
> > So it can be used as a back connection.
> >
> > However, even as an end-node, you can have several *lines* on and
> > active
> > at the same time. And this is a trick to use if you want
> > DECnet-over-IP,
> > but want to be an endnode. You need ethernet for TCP/IP to work, but
> > you
> > do not want DECnet to use the ethernet circuit.
> >
> > But you configure one IP line as well, and that is the one DECnet
> will
> > be using. Meanwhile, TCP/IP is using the ethernet line.
> >
> > It might sound a little confusing, but think about it for a second,
> and
> > I hope it becomes clear. Otherwise, just ask, and I'll try to
> > explain it
> > better.
> >
> > > Also, you should define all the nodes you want to talk to with
> > NCP in
> > > one of the startup files or do it with CFE but I prefer startup
> > so it’s
> > > simple to change.
> >
> > I would actually say that you wouldn't. Of course, there is nothing
> > wrong in doing this, but if you want the full HECnet nodename
> database,
> > it contains 700 nodes. That will take a while to type in.
> >
> > However, you can copy the nodename database from another DECnet node,
> > and then use this.
> >
> > But you need at least the nodename of someone where you will be
> copying
> > from to start with, which is why I suggested adding MIM at the start.
> >
> > After that, there is [5,54]NNC which is the nodename collector task.
> > Run
> > it, collect names from another node, and build a new database with
> > this.
> > Then stop and restart the node name server, and you have all the
> nodes
> > defined.
> >
> > (The node name server is managed by the command SCP.
> > So, SCP STOP followed by SCP START will do it.)
> >
> > Johnny
> >
> > --
> > Johnny Billquist || "I'm on a bus
> > || on a psychedelic trip
> > email: bqt at softjar.se <mailto:bqt at softjar.se> ||
> > Reading murder books
> > pdp is alive! || tryin' to stay hip" - B. Idol
> >
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20190608/08115b79/attachment.html>
More information about the Hecnet-list
mailing list