[HECnet] RSTS/E 10.1 DECnet/E 4.1 noob question

[Supratim Sanyal]

How do I get the executor to be an end-node?

$ NCP
NCP>SHOW EXEC CHAR
Node Volatile Characteristics as of 10-MAR-19 08:50:34

Executor Node = 31.28 (RST101)

State                      = On
Identification             = DECnet/E V4.1
Management Version         = 4.3.0
Loop Count                 = 1
Loop Length                = 128
Loop With                  = Mixed
Counter Timer              = 0
Incoming Timer             = 120
Outgoing Timer             = 120
ECL Version                = 4.0.0
Maximum Links              = 32
Delay Factor               = 48
Delay Weight               = 3
Inactivity Timer           = 120
Retransmit Factor          = 5
Routing Version            = 2.0.0
Type                       = Routing IV
Routing Timer              = 120
Broadcast Routing Timer    = 40
Maximum Address            = 1023
Maximum Circuits           = 16
Maximum Cost               = 1022
Maximum Hops               = 30
Maximum Visits             = 32
Maximum Area               = 63
Max Broadcast Nonrouters   = 64
Max Broadcast Routers      = 16
Maximum Buffers            = 100
Buffer Size                = 576
Segment Buffer Size        = 576
Default Account            = [50,1]
Data Xmit Queue Max        = 4
Int/LS Queue Max           = 2
Maximum Nodes              = 3000
Volatile Param File Name   = SY0:[0,1]NSP0.SYS
NCP>DEFINE EXEC TYPE NONROUTING IV
?Invalid command - DEFINE EXEC \\TYPE NONROUTING IV\\
NCP>HELP DEFINE EXEC

Programs

   NCP

     DEFINE

       EXECUTOR

         Use the SET EXECUTOR command to create or modify parameters in the
         volatile database which controls the network on the executor node.
         Use the DEFINE EXECUTOR command to create or modify parameters 
in the
         volatile database which controls the network on the executor node.


         SET     EXECUTOR        (parameters ...)



         Additional help is available on:

         ALL             ADDRESS         BROADCAST ROUTING TIMER
         BUFFER SIZE     COUNTER TIMER   DATA TRANSMIT QUEUE MAXIMUM
         DEFAULT ACCOUNT DELAY FACTOR    DELAY WEIGHT    IDENTIFICATION
         INACTIVITY TIMER  INCOMING TIMER  INTERRUPT TRANSMIT QUEUE MAXIMUM
         MAXIMUM ADDRESS MAXIMUM AREA    MAXIMUM BROADCAST NONROUTERS
         MAXIMUM BROADCAST ROUTERS.      MAXIMUM BUFFERS MAXIMUM CIRCUITS
         MAXIMUM COST    MAXIMUM HOPS    MAXIMUM LINKS   MAXIMUM NODES
         MAXIMUM VISITS  NAME            OUTGOING TIMER  RETRANSMIT FACTOR
         ROUTING TIMER   SEGMENT BUFFER SIZE             STATE
         TRANSMIT ANSWER PASSWORD        TRANSMIT ORIGINATE PASSWORD
         VOLATILE PARAMETER FILE NAME    Examples        NODE


  Programs NCP DEFINE EXECUTOR Subtopic?