[HECnet] HECnet mapper -- request to backbone node operators

[Keith Halewood]

When I do

svn checkout svn://akdesign.dyndns.org/pydecnet/trunk/pydecnet pydecnet.latest

it says I've checked out 524. I had to make the modification for the native TAP device support in ethernet.py but other than that, it's fine.

Keith

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Paul Koning
Sent: 16 August 2020 17:40
To: Bob Armstrong <bob at jfcl.com>
Cc: <hecnet at update.uu.se> <hecnet at Update.UU.SE>
Subject: Re: [HECnet] HECnet mapper -- request to backbone node operators



> On Aug 16, 2020, at 11:37 AM, Robert Armstrong <bob at jfcl.com> wrote:
> 
>> Paul Koning <paulkoning at comcast.net> wrote:
>> If you're running PyDECnet, you need to upgrade to the current 
>> version, rev
> 524.
> 
>  When I do an
> 
> 	svn co svn://akdesign.dyndns.org/pydecnet/trunk/pydecnet
> 
> the version of pyDECnet I get is 523, NOT 524.  Is this just a typo?

Yes, sorry.  Sometimes I get mixed up about revs.  The remote sink stuff was added in 520 and corrected in 521.

> 
>  With the logging monitor enabled as described, this version of 
> pyDECnet runs for a few seconds and then dies with
> 
> 2020-08-16 08:35:19.836: A2RTR: Exception caught in mainloop Traceback 
> (most recent call last):
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/node.py"
> , line 198, in mainloop
>    work.dispatch ()
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/ti
> mers.p
> y", line 120, in dispatch
>    super ().dispatch ()
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/co
> mmon.p
> y", line 249, in dispatch
>    self.owner.dispatch (self)
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/st
> atemac
> hine.py", line 63, in dispatch
>    newstate = self.state (data)
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/ns
> p.py",
> line 1387, in s0
>    raise InternalError ("S0 state not used")
> decnet.common.InternalError: S0 state not used
> 2020-08-16 08:35:19.842: A2RTR: Stopping node
> 
> Bob

Strange.  Can you enable TRACE logging and email me the resulting log?

	paul