[HECnet] HECnet mapper -- request to backbone node operators

[David Moylan]

Hi Paul,


i've upgraded A35RTR on 35.1023 to PyDECnet 526 and put in the logging line as requested.


as per Keith, i also had to make the changes to TapEth so i could speak to /dev/net/tun. this is the same as i've done previously - but I actually had a recollection that this change had actually been rolled into one of the previous builds? perhaps i'm wrong.


i have one query - i run PyDECnet as a daemon and normally my local log files show up/down route visibility. i assume with the "logging monitor" line that this functionality is changed? is there a way to set the logging so I can see the up/down in the network as i did previously?


if it matters, i was on version 488 and did a fresh install of 526.


many thanks,


cheers, Wiz!!


________________________________
From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> on behalf of Keith Halewood <Keith.Halewood at pitbulluk.org>
Sent: Monday, 17 August 2020 2:46:41 AM
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] HECnet mapper -- request to backbone node operators

When I do

svn checkout svn://akdesign.dyndns.org/pydecnet/trunk/pydecnet pydecnet.latest

it says I've checked out 524. I had to make the modification for the native TAP device support in ethernet.py but other than that, it's fine.

Keith

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Paul Koning
Sent: 16 August 2020 17:40
To: Bob Armstrong <bob at jfcl.com>
Cc: <hecnet at update.uu.se> <hecnet at Update.UU.SE>
Subject: Re: [HECnet] HECnet mapper -- request to backbone node operators



> On Aug 16, 2020, at 11:37 AM, Robert Armstrong <bob at jfcl.com> wrote:
>
>> Paul Koning <paulkoning at comcast.net> wrote:
>> If you're running PyDECnet, you need to upgrade to the current
>> version, rev
> 524.
>
>  When I do an
>
>        svn co svn://akdesign.dyndns.org/pydecnet/trunk/pydecnet
>
> the version of pyDECnet I get is 523, NOT 524.  Is this just a typo?

Yes, sorry.  Sometimes I get mixed up about revs.  The remote sink stuff was added in 520 and corrected in 521.

>
>  With the logging monitor enabled as described, this version of
> pyDECnet runs for a few seconds and then dies with
>
> 2020-08-16 08:35:19.836: A2RTR: Exception caught in mainloop Traceback
> (most recent call last):
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/node.py"
> , line 198, in mainloop
>    work.dispatch ()
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/ti
> mers.p
> y", line 120, in dispatch
>    super ().dispatch ()
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/co
> mmon.p
> y", line 249, in dispatch
>    self.owner.dispatch (self)
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/st
> atemac
> hine.py", line 63, in dispatch
>    newstate = self.state (data)
>  File
> "/usr/local/lib/python3.6/dist-packages/decnet-1.0-py3.6.egg/decnet/ns
> p.py",
> line 1387, in s0
>    raise InternalError ("S0 state not used")
> decnet.common.InternalError: S0 state not used
> 2020-08-16 08:35:19.842: A2RTR: Stopping node
>
> Bob

Strange.  Can you enable TRACE logging and email me the resulting log?

        paul


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20200817/7b388f09/attachment.html>