[HECnet] Bringing up a MicroVAX 3100-80

[David Cooper]

Actually, port 0 is the console port, depending on the position of the s1 switch.  Simply try both positions and one will work.

I only use my MicroVAXen and VAXstations with console terminals.  I don't have any of them hooked up to displays or mice or keyboards.



-----Original Message-----
From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> On Behalf Of Robert Armstrong
Sent: Thursday, March 26, 2020 6:56 PM
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] Bringing up a MicroVAX 3100-80

> John H. Reinhardt <johnhreinhardt at thereinhardts.org> wrote:
>The OPA0: port is #3 (don't ask me why)

  In the VAXstation (NOT MicroVAX), starting with the 2000 family, serial ports 0 and 1 were for the keyboard and mouse.  Port 2 was for the modem/communications, and port 3 was for the printer.  VAXstations didn't normally need a serial console, but if you had to connect one for some reason the printer port was used.  They couldn't use ports 0 or 1 because those were needed for the keyboard/mouse, and I guess DEC decided they wanted to keep the modem port open.  The MicroVAX-2000 and 3000s are the same hardware as the corresponding VAXstation, and DEC kept the serial port assignments the same.

Bob

This web site has just about everything you want to know about DEC modular wiring and their parts (plus a lot more, check out the RS-232 pages)).

<https://www.lammertbies.nl/comm/cable/dec-mmj#bc16>

-- 
John H. Reinhardt