[HECnet] BQTCP without DECnet
Lee Gleason
lee.gleason at comcast.net
Sat May 9 10:50:05 PDT 2020
On 5/8/2020 9:32 PM, Johnny Billquist wrote:
> On 2020-05-09 03:51, Lee Gleason wrote:
>>
>> I'm working on an 11/73 running Mplus that is tight on disk
>> space, to the point that DECnet won't fit. I was wondering if RSX
>> TCP/IP (that consumes less disk space) would work on a Q bus machine
>> without DECnet. It's documented as possible for Unibus machines - can
>> it work on a QBus system?
>
> In theory it could. The problem is that you need some device driver
> for the Qbus ethernet card, and unfortunately DEC didn't provide any.
> There is for the Unibus ethernet, which is why that works.
>
> If DECnet is installed on the machine, TCP/IP will be using the
> drivers provided through DECnet, so that they can co-exist. And that
> is usually how it is used, so I have never bothered looking into
> writing a device driver of my own for the Qbus ethernet cards.
>
OK, thanks for the info. I doubt I'll find a driver to use, and don't
have time to write one. For this project, looks like it's time for me to
Kermit like it's 1989.
--
Lee K. Gleason N5ZMR
Control-G Consultants
lee.gleason at comcast.net
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
More information about the Hecnet-list
mailing list