[HECnet] *** Very important information ***

[Thomas DeBellis]

Then I think I got a false negative from the 36 bit DECnet 'ping' utility.

    NETPTH>*venti*

    [Routing path from VENTI2 (2.522) to VENTI (2.20)]

      From              Via        Back          Thru       Cost    Hops
    VENTI2 (2.522)    =>NI-0-0   /BRG-0   <=    A2RTR (2.1023)      5      2
    A2RTR  (2.1023)   =>DUP-1    /KDP-0-0 <=    VENTI (2.20)       -1     -1

    NETPTH>*mim*

    [Routing path from VENTI2 (2.522) to MIM (1.13)]

      From              Via        Back          Thru         Cost    Hops
    VENTI2 (2.522)    =>NI-0-0   /BRG-0   <=    A2RTR (2.1023)       
    -1    -1
    A2RTR  (2.1023)   =>MUL-1    /
    ?NETPTH NTMAN failed, reason:
    Parameter missing

I immediately tested with the node fetch batch job and it worked fine:

    10:38:42 USER MIM::DU1:[DECNET]
    10:38:42 USER   FIX.T20;122;P775656             17 33280(8)  
    21-Nov-2021 23:00:10


On 11/22/21 11:02 AM, Johnny Billquist wrote:
> Hi. MIM will continue to be the source. And now Mim.Update.UU.SE is a 
> CNAME to Mim.Stupi.NET, so hopefully nothing needs to change anywhere.
>
>   Johnny
>
> On 2021-11-22 16:58, Thomas DeBellis wrote:
>> Hi Johhny,
>>
>> Will MIM continue to be the online source of record for the T20.CMD 
>> node list?  Or should I go elsewhere to fetch it?
>>
>> --T
>>
>> On 11/22/21 10:52 AM, Johnny Billquist wrote:
>>> On 2021-11-22 16:51, Robert Armstrong wrote:
>>>>> Peter Lothberg <roll at stupi.com> wrote:
>>>>> hecnet-1023, 192.108.202.70  is UP but I drop all packets towards 
>>>>> it that
>>>>> are not HECnet tunnels in one or the other form.. (linux.....)
>>>>
>>>>    Did you include Multinet in your rules?
>>>>
>>>>    A2RTR used to have a Multinet tunnel to MIM (Johnny's RSX TCP/IP 
>>>> stack supports that), and when I change it to
>>>>
>>>>     circuit MUL-1 Multinet hecnet-1-1023.stupi.net:700:connect 
>>>> --cost=12
>>>>
>>>> it doesn't connect.  FWIW, the previous connection was
>>>>
>>>>     #circuit MUL-1 Multinet mim.update.uu.se:700:connect --cost=12
>>>
>>> Sorry, that would be my fault. I saw that Peter had some comments 
>>> about links to you in the config, so I didn't do anything. Let me 
>>> set you up as with Mim before then, but to hecnet-1-1023. In a sec...
>>>
>>>   Johnny
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20211122/23d46940/attachment.htm>