[HECnet] Multinet Mail

[Kurt Hamm]

I am looking in IP and there isn't anything for MNC.

In terms of topology, I currently have two 3900s, Larry and Moe.  Larry is
configured for the connection to HECNet.  Moe is configured (decnet over
IP) to connect to Larry.  This seems to work with both servers being able
to set host and see files on HECNet.

My idea was that I could have the PDP-11 (Frodo) point to Larry as well via
DECNet over IP.

Is this what you are describing?

Kurt



Directory DU0:[IP]
6-JUN-2019 15:09

NTPDATE.TSK;210     63.     C  11-JAN-2019 03:13
NTPDATRES.TSK;210   42.     C  11-JAN-2019 03:13
MAILD.TSK;123       237.    C  11-JAN-2019 03:13
PCL.TSK;210         63.     C  11-JAN-2019 03:13
PCLRES.TSK;213      33.     C  11-JAN-2019 03:13
IFDRV.TSK;213       7.      C  13-JAN-2019 14:47
IPDRV.TSK;213       14.     C  13-JAN-2019 14:47
UDDRV.TSK;213       16.     C  13-JAN-2019 14:48
TCDRV.TSK;213       35.     C  13-JAN-2019 14:48
IFCONFIG.TSK;424    37.     C  11-JAN-2019 03:13
NETSTAT.TSK;424     23.     C  11-JAN-2019 03:13
PING.TSK;424        64.     C  11-JAN-2019 03:13
TRACERT.TSK;424     16.     C  11-JAN-2019 03:13
ETHACP.TSK;424      25.     C  11-JAN-2019 03:13
RESACP.TSK;424      24.     C  11-JAN-2019 03:13
RMD.TSK;400         217.    C  11-JAN-2019 03:13
DHCP.TSK;409        67.     C  11-JAN-2019 03:13
DHCPRES.TSK;409     45.     C  11-JAN-2019 03:13
RWHOD.TSK;396       15.     C  11-JAN-2019 03:13
TFTPD.TSK;396       64.     C  11-JAN-2019 03:13
INETD.TSK;409       12.     C  11-JAN-2019 03:13
SPOOF.TSK;409       12.     C  11-JAN-2019 03:13
WWW.TSK;409         117.    C  11-JAN-2019 03:13
WWWRES.TSK;409      94.     C  11-JAN-2019 03:13
IRCBOT.TSK;409      66.     C  11-JAN-2019 03:13
FTPD.TSK;409        62.     C  11-JAN-2019 03:13
TELNETD.TSK;408     26.     C  11-JAN-2019 03:13
TELNET.TSK;408      41.     C  11-JAN-2019 03:13
TFTP.TSK;394        106.    C  11-JAN-2019 03:13
IRC.TSK;408         72.     C  11-JAN-2019 03:13
IRCRES.TSK;395      46.     C  11-JAN-2019 03:13
FTP.TSK;409         67.     C  11-JAN-2019 03:13
TELCOM.TSK;402      3.      C  13-JAN-2019 14:48

Total of 1831./1831. blocks in 33. files

On Thu, Jun 6, 2019 at 3:17 PM Johnny Billquist <bqt at softjar.se> wrote:

> If you have my TCP/IP installed, and you have generated DECnet with the
> Multinet lines, then things should be pretty easy. MNC might not be
> installed, but MNC.TSK should be in [IP], so just install it then.
>
> However, do you really have all your DECnet machines on separate
> ethernets? Otherwise I would really recommend that you have DECnet on
> your local ethernet, and just have one machine which is the router to
> the outside from the ethernet segment. Individual point-to-point links
> will not be as efficient as the ethernet.
>
>    Johnny
>
> On 2019-06-06 21:09, Kurt Hamm wrote:
> > New issue.  I am working to setup my (Oscar) PiDP-11 on HECNet
> > (Decnet).  The docs say that I need to run MNC to setup the links for
> > DECNet, but I can't find that application anywhere.  I am assuming that,
> > for the PiDP-11, NETGEN  and IPNET have been completed.  I just need to
> > configure my circuits and make sure the PiDP-11 has the correct
> area.node.
> >
> > RSX-11M+ newbie, so sorry if I am missing something basic.
> >
> > Kurt
> >
> > On Thu, Jun 6, 2019 at 2:53 PM Johnny Billquist <bqt at softjar.se
> > <mailto:bqt at softjar.se>> wrote:
> >
> >     On 2019-06-06 15:04, Kurt Hamm wrote:
> >      > I wasn't sure where to post this question, so I thought I would
> >     start here.
> >      >
> >      > I have two simh vax3900 machines.  Larry and Moe.  Larry is the
> >     HECNet
> >      > router for Moe.
> >      >
> >      > When I send email from Larry (via SMTP), the _return _email
> >     address is
> >      > correct (SYSTEM at LARRY.MYDOMAIN.COM
> >     <mailto:SYSTEM at LARRY.MYDOMAIN.COM> <mailto:SYSTEM at LARRY.MYDOMAIN.COM
> >     <mailto:SYSTEM at LARRY.MYDOMAIN.COM>>.
> >      >
> >      > When I send email from Moe (to LARRY::SMTP%"user at domain.com
> >     <mailto:user at domain.com>
> >      > <mailto:user at domain.com <mailto:user at domain.com>>"), the return
> >     email address is:
> >      > SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
> >     <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
> >     <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
> >     <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>.
> >      >
> >      > Why is Moe using the SCSSYSTEMID instead of the system name?
> >      >
> >      > *I am missing something.*
> >
> >     I'm not sure how you should do a setup of mail relaying in VMS.
> >
> >     However, you can always send from Moe to MIM::user at domain.com
> >     <mailto:MIM%3A%3Auser at domain.com>. Those
> >     mails should then get correct addresses.
> >
> >         Johnny
> >
> >     --
> >     Johnny Billquist                  || "I'm on a bus
> >                                         ||  on a psychedelic trip
> >     email: bqt at softjar.se <mailto:bqt at softjar.se>             ||
> >     Reading murder books
> >     pdp is alive!                     ||  tryin' to stay hip" - B. Idol
> >
>
> --
> Johnny Billquist                  || "I'm on a bus
>                                    ||  on a psychedelic trip
> email: bqt at softjar.se             ||  Reading murder books
> pdp is alive!                     ||  tryin' to stay hip" - B. Idol
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20190606/ca1968f7/attachment-0001.html>