[HECnet] Multinet Mail
Johnny Billquist
bqt at softjar.se
Thu Jun 6 13:14:24 PDT 2019
Well, my point was just that ethernet is a better local networking than
point-to-point multinet links. But of course multinet links also works.
And I remember wrong. All the multinet stuff for RSX is under [IPNET]
Johnny
On 2019-06-06 21:26, Kurt Hamm wrote:
> I am looking in IP and there isn't anything for MNC.
>
> In terms of topology, I currently have two 3900s, Larry and Moe. Larry
> is configured for the connection to HECNet. Moe is configured (decnet
> over IP) to connect to Larry. This seems to work with both servers
> being able to set host and see files on HECNet.
>
> My idea was that I could have the PDP-11 (Frodo) point to Larry as well
> via DECNet over IP.
>
> Is this what you are describing?
>
> Kurt
>
>
>
> Directory DU0:[IP]
> 6-JUN-2019 15:09
>
> NTPDATE.TSK;210 63. C 11-JAN-2019 03:13
> NTPDATRES.TSK;210 42. C 11-JAN-2019 03:13
> MAILD.TSK;123 237. C 11-JAN-2019 03:13
> PCL.TSK;210 63. C 11-JAN-2019 03:13
> PCLRES.TSK;213 33. C 11-JAN-2019 03:13
> IFDRV.TSK;213 7. C 13-JAN-2019 14:47
> IPDRV.TSK;213 14. C 13-JAN-2019 14:47
> UDDRV.TSK;213 16. C 13-JAN-2019 14:48
> TCDRV.TSK;213 35. C 13-JAN-2019 14:48
> IFCONFIG.TSK;424 37. C 11-JAN-2019 03:13
> NETSTAT.TSK;424 23. C 11-JAN-2019 03:13
> PING.TSK;424 64. C 11-JAN-2019 03:13
> TRACERT.TSK;424 16. C 11-JAN-2019 03:13
> ETHACP.TSK;424 25. C 11-JAN-2019 03:13
> RESACP.TSK;424 24. C 11-JAN-2019 03:13
> RMD.TSK;400 217. C 11-JAN-2019 03:13
> DHCP.TSK;409 67. C 11-JAN-2019 03:13
> DHCPRES.TSK;409 45. C 11-JAN-2019 03:13
> RWHOD.TSK;396 15. C 11-JAN-2019 03:13
> TFTPD.TSK;396 64. C 11-JAN-2019 03:13
> INETD.TSK;409 12. C 11-JAN-2019 03:13
> SPOOF.TSK;409 12. C 11-JAN-2019 03:13
> WWW.TSK;409 117. C 11-JAN-2019 03:13
> WWWRES.TSK;409 94. C 11-JAN-2019 03:13
> IRCBOT.TSK;409 66. C 11-JAN-2019 03:13
> FTPD.TSK;409 62. C 11-JAN-2019 03:13
> TELNETD.TSK;408 26. C 11-JAN-2019 03:13
> TELNET.TSK;408 41. C 11-JAN-2019 03:13
> TFTP.TSK;394 106. C 11-JAN-2019 03:13
> IRC.TSK;408 72. C 11-JAN-2019 03:13
> IRCRES.TSK;395 46. C 11-JAN-2019 03:13
> FTP.TSK;409 67. C 11-JAN-2019 03:13
> TELCOM.TSK;402 3. C 13-JAN-2019 14:48
>
> Total of 1831./1831. blocks in 33. files
>
> On Thu, Jun 6, 2019 at 3:17 PM Johnny Billquist <bqt at softjar.se
> <mailto:bqt at softjar.se>> wrote:
>
> If you have my TCP/IP installed, and you have generated DECnet with the
> Multinet lines, then things should be pretty easy. MNC might not be
> installed, but MNC.TSK should be in [IP], so just install it then.
>
> However, do you really have all your DECnet machines on separate
> ethernets? Otherwise I would really recommend that you have DECnet on
> your local ethernet, and just have one machine which is the router to
> the outside from the ethernet segment. Individual point-to-point links
> will not be as efficient as the ethernet.
>
> Johnny
>
> On 2019-06-06 21:09, Kurt Hamm wrote:
> > New issue. I am working to setup my (Oscar) PiDP-11 on HECNet
> > (Decnet). The docs say that I need to run MNC to setup the links
> for
> > DECNet, but I can't find that application anywhere. I am
> assuming that,
> > for the PiDP-11, NETGEN and IPNET have been completed. I just
> need to
> > configure my circuits and make sure the PiDP-11 has the correct
> area.node.
> >
> > RSX-11M+ newbie, so sorry if I am missing something basic.
> >
> > Kurt
> >
> > On Thu, Jun 6, 2019 at 2:53 PM Johnny Billquist <bqt at softjar.se
> <mailto:bqt at softjar.se>
> > <mailto:bqt at softjar.se <mailto:bqt at softjar.se>>> wrote:
> >
> > On 2019-06-06 15:04, Kurt Hamm wrote:
> > > I wasn't sure where to post this question, so I thought I
> would
> > start here.
> > >
> > > I have two simh vax3900 machines. Larry and Moe. Larry
> is the
> > HECNet
> > > router for Moe.
> > >
> > > When I send email from Larry (via SMTP), the _return _email
> > address is
> > > correct (SYSTEM at LARRY.MYDOMAIN.COM
> <mailto:SYSTEM at LARRY.MYDOMAIN.COM>
> > <mailto:SYSTEM at LARRY.MYDOMAIN.COM
> <mailto:SYSTEM at LARRY.MYDOMAIN.COM>>
> <mailto:SYSTEM at LARRY.MYDOMAIN.COM <mailto:SYSTEM at LARRY.MYDOMAIN.COM>
> > <mailto:SYSTEM at LARRY.MYDOMAIN.COM
> <mailto:SYSTEM at LARRY.MYDOMAIN.COM>>>.
> > >
> > > When I send email from Moe (to
> LARRY::SMTP%"user at domain.com <mailto:user at domain.com>
> > <mailto:user at domain.com <mailto:user at domain.com>>
> > > <mailto:user at domain.com <mailto:user at domain.com>
> <mailto:user at domain.com <mailto:user at domain.com>>>"), the return
> > email address is:
> > > SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
> <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
> > <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
> <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>
> > <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
> <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>
> > <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM
> <mailto:SYSTEM at SCSSYSTEMID.MYDOMAIN.COM>>>.
> > >
> > > Why is Moe using the SCSSYSTEMID instead of the system name?
> > >
> > > *I am missing something.*
> >
> > I'm not sure how you should do a setup of mail relaying in VMS.
> >
> > However, you can always send from Moe to MIM::user at domain.com
> <mailto:MIM%3A%3Auser at domain.com>
> > <mailto:MIM%3A%3Auser at domain.com
> <mailto:MIM%253A%253Auser at domain.com>>. Those
> > mails should then get correct addresses.
> >
> > Johnny
> >
> > --
> > Johnny Billquist || "I'm on a bus
> > || on a psychedelic trip
> > email: bqt at softjar.se <mailto:bqt at softjar.se>
> <mailto:bqt at softjar.se <mailto:bqt at softjar.se>> ||
> > Reading murder books
> > pdp is alive! || tryin' to stay hip" -
> B. Idol
> >
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se <mailto:bqt at softjar.se> ||
> Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
>
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
More information about the Hecnet-list
mailing list